unisonic technologies co., ltd pumx1 dual transistor www.unisonic.com.tw 1 of 2 copyright ? 2008 unisonic technologies co., ltd qw-r218-002.b npn general purpose dual transistor ? description two independently operating npn transistors. ? features * low current (max.100ma) * low voltage (max.40v) * reduces number of components and board space. * complement to pumt1. ? applications * general purpose switching and amplification. ? symbol lead-free: pumx1l halogen-free: pumx1g ? ordering information ordering number pin assignment normal lead free halogen-free package 1 2 3 4 5 6 packing PUMX1-AL6-R pumx1l-al6-r pumx1g-al6-r sot-363 e1 b1 c2 e2 b2 c1 tape reel ? marking
pumx1 dual transistor unisonic technologies co., ltd 2 of 2 www.unisonic.com.tw qw-r218-002.b ? absolute maximum ratings (t a =25 ) parameter symbol ratings unit collector-base voltage v cbo 50 v collector-emitter voltage v ceo 40 v emitter-base voltage v ebo 5 v collector current (dc) i c 100 ma peak collector current i cm 200 ma peak base current i bm 200 ma collector power dissipation p c 300 mw junction temperature t j 150 storage temperature t stg -65~+150 note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? electrical characteristics (t a =25 , unless otherwise specified) parameter symbol test conditions min typ max unit collector-emitte r saturation voltage (note) v ce(sat) i c =50ma, i b =5ma 200 mv collector cutoff current i cbo i e =0, v cb =30v 100 na emitter cutoff current i ebo v eb =4v, i c =0 100 na dc current transfer ratio h fe i c =1ma, v ce =6v 120 transition frequency f t i c =2ma, v ce =12v, f=100mhz 100 mhz collector capacitance c c i e =i e =0, v cb =12v, f=1mhz 1.5 pf note: pulse test: tp Q 300 s, Q 0.02 utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
